Welcome to RPLCD’s documentation!¶
About¶
RPLCD is a Python 2/3 Raspberry PI Character LCD library for the Hitachi HD44780 controller. It supports both GPIO (parallel) mode as well as boards with an I²C port expander (e.g. the PCF8574 or the MCP23008).
This library is inspired by Adafruit Industries’ CharLCD library as well as by Arduino’s LiquidCrystal library.
For GPIO mode, no external dependencies (except the RPi.GPIO
library, which
comes preinstalled on Raspbian) are needed to use this library. If you want to
control LCDs via I²C, then you also need the python-smbus
library.
Features¶
Already implemented
- Simple to use API
- Support for both 4 bit and 8 bit modes
- Support for both parallel (GPIO) and I²C connection
- Support for custom characters
- Support for backlight control circuits
- Built-in support for
A00
andA02
character tables - Python 2/3 compatible
- Caching: Only write characters if they changed
- No external dependencies (except
RPi.GPIO
, andpython-smbus
if you need I²C support)
Wishlist
These things may get implemented in the future, depending on my free time and motivation:
- MicroPython port
Supported I²C Port Expanders
- PCF8574 (used by a lot of I²C LCD adapters on Ali Express)
- MCP23008 (used in Adafruit I²C LCD backpack)
- MCP23017